eScan Blog
eScan Website
eScan Forum
eScan Feeds From eScan Wiki
| Revision as of 04:32, 20 April 2020 WikiSysop (Talk | contribs) ← Previous diff |
Current revision WikiSysop (Talk | contribs) |
||
| Line 5: | Line 5: | ||
| Geo-Fencing refers to drawing a virtual barrier around a location using a | Geo-Fencing refers to drawing a virtual barrier around a location using a | ||
| device’s Global Positioning System (GPS) or Internet Protocol (IP) address. | device’s Global Positioning System (GPS) or Internet Protocol (IP) address. | ||
| - | Technically, geo-fencing can be any size radius from a particular location, | + | Technically, geo-fencing can be any size radius from a particular location, anywhere from 25m to 5000m in stretch. You can define an address on the map |
| - | anywhere from a mile to state-wide. You can define an address on the map | + | |
| and set the radius around that address. If the device is in that region, | and set the radius around that address. If the device is in that region, | ||
| - | the administrator has access to the information on the device. | + | the policy set by the administrator will be active on the device. |
| </p> | </p> | ||
| <h3> | <h3> | ||
| Line 19: | Line 18: | ||
| <ol start="1" type="1"> | <ol start="1" type="1"> | ||
| <li> | <li> | ||
| - | Click <strong>Fencing Location(s)</strong> and then click <strong>Set Default Location</strong>. | + | Click <strong>Fencing Location(s)</strong> and then click <strong>Set Default Location</strong>. Default Location window appears. |
| </li> | </li> | ||
| </ol> | </ol> | ||
| - | <p> | ||
| - | Default Location window appears. | ||
| - | </p> | ||
| <p> | <p> | ||
| 2. Enter the location and then click <strong>Save</strong>. | 2. Enter the location and then click <strong>Save</strong>. | ||
| </p> | </p> | ||
| <p> | <p> | ||
| - | 3. After setting the default location, click <strong>Add</strong>. | + | 3. After setting the default location, click <strong>Add</strong>. Fencing Location(s) window appears. |
| </p> | </p> | ||
| <p> | <p> | ||
| - | Fencing Location(s) window appears. | + | 4. Enter the location and select the appropriate one from suggestions. |
| </p> | </p> | ||
| <p> | <p> | ||
| - | 4. Enter the location and select the appropriate one from suggestions. | + | 5. Select the appropriate radius by clicking Radius drop-down and then click <strong>Set</strong>. |
| - | Afterward, select the appropriate radius by clicking drop-down and then | + | |
| - | click <strong>Set</strong>. | + | |
| </p> | </p> | ||
| <p> | <p> | ||
| - | 5. In the <strong>Custom Address </strong>field, enter a name for your | + | 6. In the <strong>Custom Address </strong>field, enter a name for fencing location. |
| - | fencing location. | + | |
| </p> | </p> | ||
| <p> | <p> | ||
| - | 6. After entering all the details, click <strong>Save</strong>. | + | 7. After entering all the details, click <strong>Save</strong>. |
| </p> | </p> | ||
| <h3> | <h3> | ||
| Line 61: | Line 54: | ||
| </h3> | </h3> | ||
| <p> | <p> | ||
| - | 1. Select a location and then click <strong>Delete</strong>. | + | 1. Select a location and then click <strong>Delete</strong>. A confirmation prompt appears. |
| - | </p> | + | |
| - | <p> | + | |
| - | A confirmation prompt appears. | + | |
| - | </p> | + | |
| - | <p> | + | |
| - | 2. Click <strong>Delete</strong>. | + | |
| </p> | </p> | ||
| <p> | <p> | ||
| - | The location will be deleted. | + | 2. Click <strong>Delete</strong>. The location will be deleted. |
| </p> | </p> | ||
| <h3> | <h3> | ||
Current revision
Fencing Location(s)
Geo-Fencing refers to drawing a virtual barrier around a location using a device’s Global Positioning System (GPS) or Internet Protocol (IP) address. Technically, geo-fencing can be any size radius from a particular location, anywhere from 25m to 5000m in stretch. You can define an address on the map and set the radius around that address. If the device is in that region, the policy set by the administrator will be active on the device.
Creating a Fencing Location
To create a Fencing Location, it is necessary that a default location must be set first.
- Click Fencing Location(s) and then click Set Default Location. Default Location window appears.
2. Enter the location and then click Save.
3. After setting the default location, click Add. Fencing Location(s) window appears.
4. Enter the location and select the appropriate one from suggestions.
5. Select the appropriate radius by clicking Radius drop-down and then click Set.
6. In the Custom Address field, enter a name for fencing location.
7. After entering all the details, click Save.
Editing a Fencing Location
- Select a location and then click Edit.
- After making the necessary changes, click Save.
Deleting a Fencing Location
1. Select a location and then click Delete. A confirmation prompt appears.
2. Click Delete. The location will be deleted.
View On Map
Clicking View On Map lets you view the selected location on the Google Maps.
